| Tube Fittings Double Ferrule |
 |
|
|
| Port Connector |
|
| Spare Components |
|
| Special Fitting |
|
| Tube Ends |
|
| Tube To An Flare 37 Degree |
|
| Tube To Female Pipe Thread |
|
| Tube To Male Pipe Thread |
|
| Tube To Tube |
|
| Weld Fitting |
|
|
| - Male Pipe Weld Connector |
| - Male Pipe Weld Elbow |
| - Tube Socket Weld Elbow |
| - Tube Socket Weld Union |
|
|
|
|
|
| Male Pipe Weld Elbow |
| |
| Fractional Tube Pipe Butt Weld |
| |
 |
| |
| Tubefit part no. |
Equivalent Part no. Type 1 |
Equivalent part no Type 2 |
TUBE ODQT (INCHES) |
MALE PIPE WELD SIZE P |
Ø E |
BODY HEX F |
C |
ØT1 |
D |
L |
NUT HEX W |
| 2-MPWED-2PB |
200-2-2W |
2-1/8ZELW2 |
1/8 |
1/8 |
0.09 |
7/16 |
0.6 |
0.405 |
0.5 |
0.92 |
7/16 |
| 3-MPWED-2PB |
300-2-2W |
3-1/8ZELW2 |
3/16 |
1/8 |
0.12 |
1/2 |
0.63 |
0.405 |
0.54 |
1.01 |
1/2 |
| 4-MPWED-2PB |
400-2-2W |
4-1/8ZELW2 |
1/4 |
1/8 |
0.19 |
1/2 |
0.7 |
0.405 |
0.6 |
1.06 |
9/16 |
| 4-MPWED-4PB |
400-2-4W |
4-1/4ZELW2 |
1/4 |
1/4 |
0.19 |
9/16 |
0.7 |
0.54 |
0.6 |
1.06 |
9/16 |
| 6-MPWED-4PB |
600-2-4W |
6-1/4ZELW2 |
3/8 |
1/4 |
0.28 |
11/16 |
0.76 |
0.54 |
0.66 |
1.2 |
11/16 |
| 8-MPWED-6PB |
810-2-6W |
8-3/8ZELW2 |
1/2 |
3/8 |
0.41 |
3/4 |
0.86 |
0.675 |
0.9 |
1.37 |
7/8 |
| 8-MPWED-8PB |
810-2-8W |
8-1/2ZELW2 |
1/2 |
1/2 |
0.41 |
7/8 |
0.86 |
0.84 |
0.9 |
1.42 |
7/8 |
| 10-MPWED-8PB |
1010-2-8W |
10-1/2ZELW2 |
5/8 |
1/2 |
0.5 |
7/8 |
0.86 |
0.84 |
0.96 |
1.43 |
1 |
| 12-MPWED-12PB |
1210-2-12W |
12-3/4ZELW2 |
3/4 |
3/4 |
0.62 |
1-1/16 |
0.86 |
1.05 |
0.96 |
1.57 |
1-1/8 |
| 16-MPWED-12PB |
1610-2-12W |
16-3/4ZELW2 |
1 |
3/4 |
0.88 |
1-3/8 |
1.04 |
1.05 |
1.23 |
1.94 |
1-1/2 |
| 16-MPWED-16PB |
1610-2-16W |
16-1ZELW2 |
1 |
1 |
0.88 |
1-3/8 |
1.04 |
1.315 |
1.23 |
1.94 |
1-1/2 |
|
| |
| Tubefit tube fittings with weld ends allow you to make tube-to-weld connections. The fittings provide leak-proof seals at the tubing connections. They also eliminate costly, hazardous leaks in instrumentation and process tubing. They permit disassembly in otherwise permanently welded tubing systems.materials include 316/316l stainless steel, steel, brass and aluminium. |
| |
| Note : |
 |
The E dimension is the minimum opening & fittings of this group may be back drilling to lager id at pipe thread or straight thread end. |
|
Dimension l, c, d is shown in the finger-tight position. |
|
Dimensions are for reference only and are subject to change. |
| |
All part numbers are proprietary of their respective owners |
|
|
