| Tube Fittings Double Ferrule |
 |
|
|
| Port Connector |
|
| Spare Components |
|
| Special Fitting |
|
| Tube Ends |
|
| Tube To An Flare 37 Degree |
|
| Tube To Female Pipe Thread |
|
| Tube To Male Pipe Thread |
|
|
| - 45 Degree Male Elbow |
| - 45 Degree Positional Male Elbow |
| - Bulk Head Male Connector |
| - Long Male Connector |
| - Male Branch Tee |
| - Male Connector |
| - Male Elbow |
| - Male Run Tee |
| - Positionable Male Branch Tee |
| - Positionable Male Run Tee |
| - Positional Male Elbow |
|
|
|
| Tube To Tube |
|
| Weld Fitting |
| |
|
|
| Male Connector |
| |
| Frac Tube X Iso Para M -rpip |
| |
 |
| |
| Tubefit part no. |
Equivalent Part no. Type 1 |
Equivalent part no Type 2 |
ISOP-MALE-PIPE-SIZE P |
ODT-ØT(INCHES) |
Ø E |
BODY HEX F |
C |
L |
D |
NUT HEX W |
L1 |
| 2- MCD - 2RPIP |
-200 -1- 2RP |
---------- |
1/8 |
1/8 |
0.09 |
9/16 |
0.60 |
0.92 |
0.50 |
7/16 |
1.18 |
| 2- MCD - 4RPIP |
-200 -1- 4RP |
---------- |
1/4 |
1/8 |
0.09 |
3/4 |
0.60 |
1.13 |
0.50 |
7/16 |
1.39 |
| 4- MCD - 2RPIP |
-400 -1- 2RP |
---------- |
1/8 |
1/4 |
0.19 |
9/16 |
0.70 |
0.98 |
0.60 |
9/16 |
1.27 |
| 4- MCD - 4RPIP |
-400 -1- 4RP |
---------- |
1/4 |
1/4 |
0.19 |
3/4 |
0.70 |
1.19 |
0.60 |
9/16 |
1.48 |
| 8- MCD - 8RPIP |
-810 -1- 8RP |
---------- |
1/2 |
1/2 |
0.41 |
1-1/16 |
0.86 |
1.53 |
0.90 |
7/8 |
1.93 |
|
| |
| Note : |
 |
The E dimension is the minimum opening & fitting of this group may be back drilling to larger id at pipe thread or straight thread end. |
|
Dimension l1,c,d in shown in the finger-tight position. |
|
Dimensions are for reference only and are subject to change |
|
Iso (bsp parallel) thread as per bs 2779. |
| |
All part numbers are proprietary of their respective owners |
|
|
