| Tube Fittings Double Ferrule |
 |
|
|
| Port Connector |
|
| Spare Components |
|
| Special Fitting |
|
| Tube Ends |
|
| Tube To An Flare 37 Degree |
|
| Tube To Female Pipe Thread |
|
| Tube To Male Pipe Thread |
|
|
| - 45 Degree Male Elbow |
| - 45 Degree Positional Male Elbow |
| - Bulk Head Male Connector |
| - Long Male Connector |
| - Male Branch Tee |
| - Male Connector |
| - Male Elbow |
| - Male Run Tee |
| - Positionable Male Branch Tee |
| - Positionable Male Run Tee |
| - Positional Male Elbow |
|
|
|
| Tube To Tube |
|
| Weld Fitting |
| |
|
|
| Male Branch Tee |
| |
| Metric Tube X NPT (M) |
| |
 |
| |
| Tubefit part no. |
Equivalent Part no. Type 1 |
Equivalent part no Type 2 |
NPT FEMALE PIPE SIZE P |
LX |
ODT ØT(MM) |
Ø E |
C |
BODY HEX F |
D |
NUT HEX W |
L1 |
| 6M - MBTD - 2N |
-6MO - 3 - 2TTM |
M6MBT1/8N |
1/8 |
19.6 |
6 |
4.8 |
17.7 |
9/16 |
15.3 |
14 |
53.9 |
| 6M - MBTD - 4N |
-6MO - 3 - 4TTM |
M6MBT1/4N |
1/4 |
19.6 |
6 |
4.8 |
17.7 |
9/16 |
15.3 |
14 |
53.9 |
| 8M - MBTD - 2N |
-8MO - 3 - 2TTM |
M8MBT1/8N |
1/8 |
22.4 |
8 |
4.8 |
18.6 |
5/8 |
16.2 |
16 |
59.7 |
| 8M - MBTD - 4N |
-8MO - 3 - 4TTM |
M8MBT1/4N |
1/4 |
22.4 |
8 |
6.4 |
18.6 |
5/8 |
16.2 |
16 |
59.7 |
| 10M - MBTD - 4N |
-10MO - 3 - 4TTM |
M10MBT1/4N |
1/4 |
25.9 |
10 |
7.1 |
19.5 |
15/16 |
17.2 |
19 |
67.0 |
| 10M - MBTD - 6N |
-10MO - 3 - 6TTM |
M10MBT3/8N |
3/8 |
25.9 |
10 |
9.5 |
19.5 |
15/16 |
17.2 |
19 |
67.0 |
| 12M - MBTD - 4N |
-12MO - 3 - 4TTM |
M12MBT1/4N |
3/8 |
25.9 |
12 |
9.5 |
22.0 |
13/16 |
22.8 |
22 |
72.0 |
| 12M - MBTD - 6N |
-12MO - 3 - 6TTM |
M12MBT3/8N |
1/4 |
25.9 |
12 |
7.1 |
22.0 |
13/16 |
22.8 |
22 |
72.0 |
| 12M - MBTD - 8N |
-12MO - 3 - 8TTM |
M12MBT1/2N |
1/2 |
25.9 |
12 |
9.5 |
22.0 |
7/8 |
22.8 |
22 |
72.0 |
| 16M - MBTD - 8N |
-16MO - 3 - 8TTM |
M16MBT1/2N |
1/2 |
28.9 |
16 |
11.9 |
22.0 |
1 |
24.4 |
25 |
77.6 |
|
| |
| Note : |
 |
The E dimension is the minimum opening & fitting of this group may be back drilling to larger id at pipe thread or straight thread end. |
|
Dimension l1,c,d in shown in the finger-tight position. |
|
Dimensions are for reference only and subject to change. |
|
Npt thread as per ansi b 1.20.1. |
| |
All part numbers are proprietary of their respective owners |
|
|
